Drive Fitting
Drive Fitting

If you’re serious about opening and unloading railcars, your Gate Opener — regardless of make or model — needs a serious Drive Fitting. WORKMASTER®’s tapered, 1-piece Drive Fitting is designed to fit every railcar capstan with full contact on all sides.

Part: #33-10013

Drive Fitting Extensions
Drive Fitting Extensions

Unmovable obstacles and/or unloading site gaps can make getting your Gate Opener close to the railcar’s capstan nearly impossible! WORKMASTER®’s heavy-duty, 12″ and 20″ Drive Fitting Extensions make the impossible possible.

Part: 12″ #33-10012 | 20″ #33-10020

Universal Joint
Universal Joint

Covered hopper cars come in a variety of shapes and sizes, and the height of a capstan and the surrounding terrain can vary just as much. WORKMASTER®’s Heavy-Duty Universal Joint can help overcome these height variances.

Part: #33-10090

Swage Kit
Swage Kit

Over time, the inside edges of a railcar’s capstan can wear and become rounded. When this happens, opening and unloading a hopper car becomes an inefficient and costly task. WORKMASTER®’s tapered Swage Kit can bring new life to the most worn capstans.

Part: #33-11120

Horizontal Air Reciever Tank
Horizontal Air Receiver Tanks

To ensure you’re getting the most out of your Pneumatic Gate Opener and Railcar Pocket Vibrators, your plant’s air system may need some help. WORKMASTER®’s Air Receiver Tanks can deliver the additional compressed air volume your unloading site requires.

Size         Part #           Dimensions(LxWxH)
30 gal     31-32030      38″ x 16″ x 18″
60 gal     31-32060      48″ x 20″ x 22″
80 gal     31-32080      63″ x 20″ x 22″
120 gal   31-32120      68″ x 24″ x 26″
240 gal   31-32240      84″ x 30″ x 33″

Vertical Air Receiver Tanks

To ensure you’re getting the most out of your Pneumatic Gate Opener and Railcar Pocket Vibrators, your plant’s air system may need some help. WORKMASTER®’s Air Receiver Tanks can deliver the additional compressed air volume your unloading site requires.

Size        Part #         Dimensions(WxH)
30 gal      31-33030     16″ x 38″
60 gal      31-33060     20″ x 48″
80 gal      31-33080     24″ x 46″
120 gal    31-33120     24″ x 67″

Exhaust Diverter Kit
Exhaust Diverter Kit

Unloading sites are, by nature, dusty and dirty. At some sites, the airborne fines and powders can cause annoying or dangerous visibility problems. The WORKMASTER® Exhaust Diverter can’t eliminate the problem, but it can certainly improve it.

Part: #33-20039

Eliminizer Filter/Dryer with Stand
Eliminizer Filter/Dryer with Stand

Stop water and dirt from entering your Gate Opener with WORKMASTER®’s Eliminizer Filter/Dryer with Stand Assembly. This unique Accessory incorporates patented inverse flow technology engineered specifically to remove condensed liquids and dirt from air-lines.

Part: #82-10424

FRL Assembly with Carrier
FRL Assembly with Carrier

If your Gate Opener is not designed to include an In-Line Lubricator, WORKMASTER®’s FRL Assembly is ideal. The Assembly maximizes tool protection by filtering, regulating, and lubricating your Gate Opener’s air supply.

Part: #82-10330

In-Line Lubricator
In-Line Lubricator

Designed for the intermittent start / stop operation of Gate Openers and Vibrators, and factory-set to deliver just the right amount of air tool oil, WORKMASTER®’s In-Line Lubricator is the preferred way to supply the lubrication your air-powered equipment needs.

Part: #82-40003

VIBRA-LUBE
VIBRA-LUBE Vibrator Oil

The internal parts of Pneumatic Rotary and
Piston Type Vibrators are subject to severe
stress and require a special type of lubrication. WORKMASTER®’s VIBRA-LUBE Vibrator Oil is uniquely formulated to coat and protect a vibrator’s inner lining and moving parts.

Part:
1 qt #36-21020 | 1 case (12 qts) #36-21024

TOOL-LUBE
TOOL-LUBE Air Tool Oil

Keep your Gate Opener running up to three times longer and cleaner, with less downtime and greater power by using WORKMASTER®’s TOOL-LUBE Air Tool Oil. With regular use of TOOL-LUBE, you can expect greater performance, consistency, and less noise.

Part:
1 qt  #36-21010 | 1 case (12 qts) #36-21016

Pin & Ring Connector
Pin & Ring Connector

If your unloading site sees a variety of railcars and you’re constantly changing the accessories on your Gate Opener, you’ll need WORKMASTER®’s Pin & Ring Connector to help keep the job moving. The Pin is hardened steel and the Rink is nick-resistant rubber.

Part: Pin #32-50124 | Ring #32-50000

Ball Valves
Ball Valves

Ball Valves are an integral part of an unloading site’s air system, unfortunately they’re often overlooked. WORKMASTER®’s Brass Lockable Ball Valves can give you greater, more convenient control over your Gate Opener and Vibrator’s air supply.

Size           Part #
3/8”           81-10002
1/2”           81-10003
3/4”           81-10004
1”               81-10005

Ret-Ring Connector
Ret-Ring Connector

WORKMASTER®’s 1-1/2″ Ret-Ring Connector secures your Drive Fitting to your Gate Opener, Extension, or Universal Joint. One piece, molded of durable polyurethane, with a steel insert for added safety, the Ret-Ring Connector makes changing accessories quick and easy.

Part: #32-50001

Air Hose Assemblies
1" Gate Opener Air Hose Assemblies

Railcar Gate Openers and Pocket Vibrators are designed to create an efficient and safe work environment. WORKMASTER®’s 1/2″, 3/4″, and 1″ Heavy-Duty Air Hose Assemblies come in a range of lengths to keep your Gate Opener and Vibrators operating safely at any distance.

Length          Part#
10 ft               83-09078-09
15 ft               83-09118-09
25 ft               83-09134-09
50 ft               83-09174-09

Whipcheck Safety Cable
Whipcheck Safety Cable

WORKMASTER®’s Whipcheck Safety Cable is a safe, positive, economical solution to the problem of injuries caused by broken air hose connections. Easily installed and removed without the use of tools, this simple device is also highly resistant to rust and corrosion.

Part: #74-10010

Air Hose Assemblies
3/4" Vibrator Air Hose Assemblies

Railcar Gate Openers and Pocket Vibrators are designed to create an efficient and safe work environment. WORKMASTER®’s 1/2″, 3/4″, and 1″ Heavy-Duty Air Hose Assemblies come in a range of lengths to keep your Gate Opener and Vibrators operating safely at any distance.

Length        Part#
10 ft             83-09077-09
15 ft             83-09117-09
25 ft             83-09133-09
50 ft             83-09173-09

Protective Cover
Protective Cover

Rain, snow, and plant debris can really do a number on your Hopper Car Gate Opener. Keep your Gate Opener working and looking like new with WORKMASTER®’s water-proof, puncture-resistant, tapered-fit Protective Cover.

Part: #30-20020

Air Hose Assemblies
1/2" Vibrator Air Hose Assemblies

Railcar Gate Openers and Pocket Vibrators are designed to create an efficient and safe work environment. WORKMASTER®’s 1/2″, 3/4″, and 1″ Heavy-Duty Air Hose Assemblies come in a range of lengths to keep your Gate Opener and Vibrators operating safely at any distance.

Length          Part#
10 ft               83-09076-09
15 ft               83-09116-09
25 ft               83-09132-09
50 ft               83-09172-09